You don't see the Icon in red rectangle in attached file?
Re: Briefcase Connection Issues
↧
↧
Re: vMotion and Shared vs Local Storage
Yes there is an additional charge - this doc mught help http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2002309
↧
VMFS datastore visible on 3 of 6 hosts. Remaining 3 hosts see the LUN, status is Mounted, but datastore is not visible.
As the title suggests, all hosts see the LUNs... can't figure out the issue. Below is a capture of the vmkernel.log captured from the server as it was doing a Rescan (which results in a loop of activity in the logfile and lasts 10+ minutes with no change to the storage).
The SAN is preesnting the LUNs and successfully... so it has to be host side. In an act of desperation, yesterday I reinstalled ESXi on one of the troubled hosts. It was able to see the datastores. Today, they were no longer visible.
Thanks in advance for any help.
vmkernel.log:
2013-06-26T13:07:56.778Z cpu1:15038)Partition: 558: Read of GPT entries (hdrlba=1) failed on "naa.600144f0f9e18d0000005160917e0001": I/O error
2013-06-26T13:07:56.778Z cpu1:15038)Partition: 661: Read from primary gpt table failed on "naa.600144f0f9e18d0000005160917e0001".
2013-06-26T13:07:56.778Z cpu1:15038)ScsiDeviceIO: 2303: Cmd(0x4124003a4680) 0x88, CmdSN 0xabd from world 0 to dev "naa.600144f0f9e18d0000005160917e0001" failed H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0.
2013-06-26T13:07:56.863Z cpu1:8193)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:07:57.005Z cpu1:8193)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:07:57.063Z cpu8:8776)iscsi_vmk: iscsivmk_ConnNetRegister: socket 0x410022110b10 network resource pool netsched.pools.persist.iscsi associated
2013-06-26T13:07:57.063Z cpu8:8776)iscsi_vmk: iscsivmk_ConnNetRegister: socket 0x410022110b10 network tracker id 1 tracker.iSCSI.192.168.70.10 associated
2013-06-26T13:07:57.091Z cpu1:8193)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:07:57.234Z cpu1:8193)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:07:57.378Z cpu1:8193)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:07:57.520Z cpu1:8193)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:07:57.563Z cpu1:8193)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237:NMP device "naa.600144f0f9e18d0000005160917e0001" state in doubt; requested fast path state update...
2013-06-26T13:07:57.568Z cpu8:8776)WARNING: iscsi_vmk: iscsivmk_StartConnection: vmhba38:CH:0 T:0 CN:0: iSCSI connection is being marked "ONLINE"
2013-06-26T13:07:57.568Z cpu8:8776)WARNING: iscsi_vmk: iscsivmk_StartConnection: Sess [ISID: 00023d000002 TARGET: iqn.2012-11.com.rhineaux:nex70 TPGT: 2 TSIH: 0]
2013-06-26T13:07:57.568Z cpu8:8776)WARNING: iscsi_vmk: iscsivmk_StartConnection: Conn [CID: 0 L: 192.168.70.50:49286 R: 192.168.70.10:3260]
2013-06-26T13:07:57.578Z cpu8:8603)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x0 D:0x2 P:0x0 Valid sense data: 0x6 0x29 0x0. Act:NONE
2013-06-26T13:07:57.578Z cpu8:8603)ScsiDeviceIO: 2303: Cmd(0x4124003a4680) 0x88, CmdSN 0xabd from world 0 to dev "naa.600144f0f9e18d0000005160917e0001" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x6 0x29 0x0.
2013-06-26T13:07:57.578Z cpu8:8603)ScsiCore: 1483: Power-on Reset occurred on naa.600144f0f9e18d0000005160917e0001
2013-06-26T13:08:07.901Z cpu8:8776)WARNING: iscsi_vmk: iscsivmk_StopConnection: vmhba38:CH:0 T:0 CN:0: iSCSI connection is being marked "OFFLINE" (Event:4)
2013-06-26T13:08:07.901Z cpu8:8776)WARNING: iscsi_vmk: iscsivmk_StopConnection: Sess [ISID: 00023d000002 TARGET: iqn.2012-11.com.rhineaux:nex70 TPGT: 2 TSIH: 0]
2013-06-26T13:08:07.901Z cpu8:8776)WARNING: iscsi_vmk: iscsivmk_StopConnection: Conn [CID: 0 L: 192.168.70.50:49286 R: 192.168.70.10:3260]
2013-06-26T13:08:07.901Z cpu10:8778)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237:NMP device "naa.600144f0f9e18d0000005160917e0001" state in doubt; requested fast path state update...
2013-06-26T13:08:07.901Z cpu10:8778)ScsiDeviceIO: 2303: Cmd(0x4124003a4680) 0x88, CmdSN 0xabe from world 0 to dev "naa.600144f0f9e18d0000005160917e0001" failed H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0.
2013-06-26T13:08:07.988Z cpu10:13652)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:08:08.130Z cpu10:13652)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:08:08.273Z cpu10:13652)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:08:08.415Z cpu10:8202)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:08:08.558Z cpu10:8805)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:08:08.558Z cpu10:8805)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237:NMP device "naa.600144f0f9e18d0000005160917e0001" state in doubt; requested fast path state update...
2013-06-26T13:08:08.696Z cpu10:8202)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:08:08.837Z cpu10:8202)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:08:08.980Z cpu10:8202)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:08:09.123Z cpu10:8202)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:08:09.265Z cpu10:8202)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:08:09.409Z cpu10:8202)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:08:09.551Z cpu10:8671)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:08:09.565Z cpu10:8202)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237:NMP device "naa.600144f0f9e18d0000005160917e0001" state in doubt; requested fast path state update...
2013-06-26T13:08:09.694Z cpu10:8202)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:08:09.838Z cpu10:8202)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:08:09.980Z cpu10:8202)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:08:10.123Z cpu10:8202)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:08:10.265Z cpu10:8778)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:08:10.409Z cpu10:8778)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:08:10.551Z cpu10:8202)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:08:10.551Z cpu10:8202)WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237:NMP device "naa.600144f0f9e18d0000005160917e0001" state in doubt; requested fast path state update...
2013-06-26T13:08:10.673Z cpu8:8776)iscsi_vmk: iscsivmk_ConnNetRegister: socket 0x410022110b10 network resource pool netsched.pools.persist.iscsi associated
2013-06-26T13:08:10.673Z cpu8:8776)iscsi_vmk: iscsivmk_ConnNetRegister: socket 0x410022110b10 network tracker id 1 tracker.iSCSI.192.168.70.10 associated
2013-06-26T13:08:10.694Z cpu10:8778)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:08:10.838Z cpu10:8202)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:08:10.979Z cpu10:8202)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:08:11.123Z cpu10:8202)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x2 D:0x0 P:0x0 Possible sense data: 0x6 0x29 0x0. Act:EVAL
2013-06-26T13:08:11.178Z cpu8:8776)WARNING: iscsi_vmk: iscsivmk_StartConnection: vmhba38:CH:0 T:0 CN:0: iSCSI connection is being marked "ONLINE"
2013-06-26T13:08:11.178Z cpu8:8776)WARNING: iscsi_vmk: iscsivmk_StartConnection: Sess [ISID: 00023d000002 TARGET: iqn.2012-11.com.rhineaux:nex70 TPGT: 2 TSIH: 0]
2013-06-26T13:08:11.178Z cpu8:8776)WARNING: iscsi_vmk: iscsivmk_StartConnection: Conn [CID: 0 L: 192.168.70.50:59905 R: 192.168.70.10:3260]
2013-06-26T13:08:11.191Z cpu12:8204)NMP: nmp_ThrottleLogForDevice:2319: Cmd 0x88 (0x4124003a4680, 0) to dev "naa.600144f0f9e18d0000005160917e0001" on path "vmhba38:C0:T0:L0" Failed: H:0x0 D:0x2 P:0x0 Valid sense data: 0x6 0x29 0x0. Act:NONE
2013-06-26T13:08:11.191Z cpu12:8204)ScsiDeviceIO: 2303: Cmd(0x4124003a4680) 0x88, CmdSN 0xabe from world 0 to dev "naa.600144f0f9e18d0000005160917e0001" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x6 0x29 0x0.
2013-06-26T13:08:11.191Z cpu12:8204)ScsiCore: 1483: Power-on Reset occurred on naa.600144f0f9e18d0000005160917e0001
/vmfs/volumes #
↧
Re: vMotion and Shared vs Local Storage
Thanks a bunch for the help
Just when think I might be getting a handle on this stuff I turn around and there is yet another piece of software to install and configure.
At this rate I might still be working on this in 2015! 
↧
Re: Migration 5.1.1 High Cpu
@Thomsit Wow, it looks like it works!
The vmx-svga dropped from 30% CPU usage to 1 or 2%, but how could this be related which each other?
↧
↧
Re: vCenter 5.1/VCO 4.1
Thank you, but I've been able to export and import the packages-I was wondering if there was any more seamless path. The sync doesn't work between 4.1 and 5.1 VCO installs.
↧
Re: OS X 10.9 Mavericks in a VM - doubleclick on desktop doesn't work
For 10.8, focus on testing this version of Fusion: VMware Fusion Technology Preview 2013
↧
Re: Configuring a VM with OS and Apps
Note: Discussion successfully moved from 9. Hot & Cold Migration – vMotion to Exchange, Domino and RIM
↧
Re: Create Automatic Pool (Linked Clone) using powerCLI
Ok, I'll give it a try.
The parentVMPath parameter expects the path to the VM from which you want to spawn the pool (obviously).
Such a path looks something like this: /MyDC/vm/MyVM
Where MyDC is the datacentername, the vm folder is the hidden folder that holds the VMs and Templates hierachy and finally the name of the VM itself.
If your master VM is deeper in the folder structure, just add the folders to the path.
Ex: /MyDC/vm/Folder1/Folder2/MyVM
The parentSnapshotPath is similar to the previous parameter, but obviously should point to the snapshot from which the pool should clone.
Alan has a nice function to retrieve the snapshotpath in Update and re-composure of View Pools.
The vmFolderPath is where the VMs that are created for the pool should be stored.
Again similar to the previous parameters, but now for the folder.
Ex: /MyDC/vm/PoolFolder
resourcePoolPath should point to a resourcepool.
Such a path will look something like this: /MyDC/host/MyCluster/Resources/MyResourcePool
Note that host and Resources are again hidden folders !
datastoreSpecs: this one is not the most obvious one.
It wants the full path to a datastore in a cluster as specified by a resource pool.
See the VVGetDatastorePath function presented in Determining Paths to vSphere Datastore Objects
The composer_ad_id wants the ID of the AD domain in which the composer is a member server.
You can get this through: Get-ComposerDomain | select composer_ad_id
As a side note, have a look at the PowerShell Integration with View 5.0 white paper. It's perhaps not intended for the latest View version,
but it explains some of the parameters a lot better than I could 
↧
↧
Re: Powercli - An item with the same key has already been added ERROR
Thank you LucD, I got the issue since a few months but I guess I did my search too quick before posting.
Now I sent the thread that said it is a known bug, to the vmware engineer that worked on my SR, and see if it goes anywhere.
↧
Re: PartitionedRegionStorageException on Cache Servers
Hi Jens,
Thanks a lot for your help. This is the information I can provide you.
I will discuss and come back if I can do something more about logs and configuration.
Any suggestions are welcome.
Thanks again looking into this.
Thanks,
Chakri
↧
Re: Single Sign on question
This happens if the first node is not installed in multisite HA mode
SSO domain ID is does not match (vCenter Install/Linked Mode)
↧
Re: Single Sign on question
↧
↧
Re: Single Sign on question
↧
Re: Single Sign on question
↧
Re: vMotion and Shared vs Local Storage
You may also notice that VSA will cost you some space as each VM will be stored twice, each copy on each host. You must also use Raid1 on your hosts.
As said by weinstein5, VSA, as an extra feature, will cost you money and also, will cost you space. This should be considered in your build.
↧
Re: Create Automatic Pool (Linked Clone) using powerCLI
Immensely Helpful. Thanks a lot!!
↧
↧
Re: Disable/Remove specific hardware fan alarm
Hi Snowdog_2112,
Not sure of the following - so assuming ESX/ESXi builds etc but need to know
- Exact build of ESX
- Is this a new ESX host or was it working earlier
- If this was working earlier, what changed
- Is the hardware make and model and ESX patch levels same across working/non working hosts?
Try the following and see what works
- Log in to the host and do a services.sh restart
- If that does not work, disconnect the host from VC (do not remove it) and connect it back
- Check in BIOS events and clear BIOS events and see
- Reset the host Hardware Sensors from ESX hardware status and see
- If nothing else works, try a host reboot and/or BIOS upgrade to the latest build
Regards
a
↧
Re: ERROR: Unable to connect to the MKS: the operation is not allowed in the current state.
Hey Mrenf,
Try the following
- vMotion the VM from one host to another and then check
- If that does not work, try taking a vSphere Client session direct to the ESX host that has the VM and open the console from that host and check
- If still does not work, just use RDP and log in to the VM and issue a reboot. Should come back fine post the reboot
Regards
a
↧
Re: vMotion and Shared vs Local Storage
Wow Thanks for the info.
So both of my hosts will have to have a copy of each VM?
VSA is not mentioned at all in the Lowe book.
Is it something that came out after 2011?
↧
More Pages to Explore .....
